Custom Storage Drivers

Endpoints and hooks marked (Pro) require MediaVerse Pro.

MediaVerse uses a pluggable storage driver system. The free plugin ships with a Local driver (stores files in the WordPress uploads directory). MediaVerse Pro adds Amazon S3 and BunnyCDN drivers. You can implement your own driver by implementing the StorageDriverInterface.

StorageDriverInterface

namespace WPMediaVerse\Services;

interface StorageDriverInterface {

    /**
     * Store a file.
     *
     * @param string $source_path  Absolute local path of the temporary file.
     * @param string $dest_path    Relative destination path (e.g., "2025/03/photo.jpg").
     * @return bool True on success.
     */
    public function store( string $source_path, string $dest_path ): bool;

    /**
     * Delete a file.
     *
     * @param string $path Relative path.
     * @return bool True on success.
     */
    public function delete( string $path ): bool;

    /**
     * Get the public URL for a file.
     *
     * @param string $path Relative path.
     * @return string Full URL.
     */
    public function url( string $path ): string;

    /**
     * Check if a file exists.
     *
     * @param string $path Relative path.
     * @return bool
     */
    public function exists( string $path ): bool;

    /**
     * Get the absolute filesystem path for a stored file.
     *
     * @since 1.1.0
     *
     * @param string $path Relative path.
     * @return string Absolute file path.
     */
    public function get_full_path( string $path ): string;

    /**
     * Download a stored file to a local destination path.
     *
     * REQUIRED for two flows:
     *   1. The `wp mvs migrate-storage` CLI command — copies media between
     *      drivers without losing files.
     *   2. Thumbnail generation in cloud mode — images stored on S3/BunnyCDN
     *      must be pulled to a local temp file before `wp_get_image_editor()`
     *      can resize them.
     *
     * A local driver returns true immediately if `$path` and `$local_dest`
     * resolve to the same file (no-op). Cloud drivers stream the remote object
     * into `$local_dest`. Return false on any download failure (the caller is
     * responsible for retries / cleanup of partial writes).
     *
     * @since 1.2.2
     *
     * @param string $path       Relative path of the source file.
     * @param string $local_dest Absolute local filesystem path to write to.
     * @return bool True on success.
     */
    public function download( string $path, string $local_dest ): bool;
}

All six methods are required. A driver that does not implement every method will fail PHP’s interface contract at load time.

Implementing a Custom Driver

use WPMediaVerse\Services\StorageDriverInterface;

class MyS3CompatibleDriver implements StorageDriverInterface {

    private string $bucket;
    private string $endpoint;

    public function __construct() {
        $this->bucket   = get_option( 'my_storage_bucket' );
        $this->endpoint = get_option( 'my_storage_endpoint' );
    }

    public function store( string $source_path, string $dest_path ): bool {
        // Upload $source_path to $this->bucket/$dest_path.
        // Return true on success.
    }

    public function delete( string $path ): bool {
        // Delete $this->bucket/$path.
    }

    public function url( string $path ): string {
        return $this->endpoint . '/' . $this->bucket . '/' . $path;
    }

    public function exists( string $path ): bool {
        // Check if object exists in bucket.
    }

    public function get_full_path( string $path ): string {
        // For remote drivers, this may return the URL or a temp local path.
        return $this->url( $path );
    }

    public function download( string $path, string $local_dest ): bool {
        // Stream $this->bucket/$path into the local file $local_dest.
        // Return true on success, false on any failure.
    }
}

Registering Your Driver

StorageService::get_driver() resolves the active driver by passing the configured driver name through the singular mvs_storage_driver filter and expecting a driver instance back. The filter receives two arguments — the current driver (null until something supplies one) and the configured driver name — and your callback returns your driver instance only when the name matches your slug, otherwise it returns $driver unchanged:

add_filter( 'mvs_storage_driver', function( $driver, string $name ) {
    return 'my_s3_compatible' === $name ? new MyS3CompatibleDriver() : $driver;
}, 10, 2 );

If no filter returns a StorageDriverInterface instance, StorageService falls back to the built-in LocalDriver.

This is exactly how MediaVerse Pro registers its own drivers — its callback switches on $name and returns the matching driver (s3, bunnycdn, r2, dospaces):

// Simplified from MediaVerse Pro. Each integration namespaces its own
// class as `StorageDriver`, so the real FQCNs are
// \WPMediaVersePro\Integrations\AmazonS3\StorageDriver,
// \WPMediaVersePro\Integrations\BunnyCDN\StorageDriver,
// \WPMediaVersePro\Integrations\CloudflareR2\StorageDriver and
// \WPMediaVersePro\Integrations\DigitalOceanSpaces\StorageDriver
// (the last two extend the AmazonS3 one).
add_filter( 'mvs_storage_driver', function( $driver, string $name ) {
    switch ( $name ) {
        case 's3':
            return new \WPMediaVersePro\Integrations\AmazonS3\StorageDriver();
        case 'bunnycdn':
            return new \WPMediaVersePro\Integrations\BunnyCDN\StorageDriver();
        default:
            return $driver;
    }
}, 10, 2 );

Then set the active driver to your slug so StorageService picks it:

wp option update mvs_storage_driver my_s3_compatible

(Or add your slug to the settings-page dropdown via a separate filter so site owners can switch to it from the admin UI.)

Local Driver Reference

The built-in local driver stores files at:

{wp_upload_dir['basedir']}/wpmediaverse/YYYY/MM/filename.ext

Files are served from:

{wp_upload_dir['baseurl']}/wpmediaverse/YYYY/MM/filename.ext

get_full_path() returns the absolute filesystem path, which is used by services like WatermarkService and AIService that need to read the file from disk.

Signed URLs and Private Delivery

Your driver does not generate signed URLs — that is SignedUrlService’s job. The flow is:

1. A read-side caller asks Core\MediaUrl::thumb() / ::file() (or SignedUrlService directly) for a URL.
2. SignedUrlService::generate() / ::generate_thumbnail() runs the privacy check (PrivacyService::can_view()), then either:
   • returns a signed /serve proxy URL (HMAC-signed query params: media ID, viewer user ID, expiry, signature) for gated/private media, or
   • returns a direct driver URL for public media on a cloud driver, so the browser hits the CDN edge instead of WordPress.
3. When the browser requests a /serve URL, SignedUrlService::serve() re-validates the signature and re-checks can_view() per request, then streams the bytes by reading the file from your driver (via get_full_path() / download()).

There is no mvs_generate_signed_url filter. The public extension points that actually exist let a cloud driver substitute its own CDN/presigned URL for the public-media direct path:

Filter	Args	When it fires
mvs_serve_public_cloud_direct	(bool $enabled, int $media_id)	Gate the “serve public cloud media directly” behavior on/off per media.
mvs_public_cloud_thumbnail_url	(string $url, int $media_id, string $size)	Final say on the public thumbnail URL for cloud-hosted media — return a presigned/CDN URL here.
mvs_public_cloud_file_url	(string $url, int $media_id, string $context)	Final say on the public full-file URL for cloud-hosted media.

// Substitute a presigned URL for your driver's public thumbnails.
add_filter( 'mvs_public_cloud_thumbnail_url', function( string $url, int $media_id, string $size ) {
    if ( 'my_s3_compatible' !== get_option( 'mvs_storage_driver' ) ) {
        return $url;
    }
    // Build the relative variant path and sign it with your SDK.
    $rel = get_post_meta( $media_id, 'thumb_' . $size . '_path', true );
    return $rel ? my_generate_presigned_url( $rel, 3600 ) : $url;
}, 10, 3 );

Private and restricted media is never eligible for the direct-cloud path — StorageService::get_driver_for_privacy() keeps non-public media on local disk, and /serve re-checks can_view() on every request. So these filters only affect public media.

Viewer-Aware Full-File URLs (2.0.0)

MediaRepositoryInterface::get_url_for_viewer() is a driver-agnostic, viewer-aware way to get a URL for a media item’s full original file (not a thumbnail) that is authorized for a specific viewer rather than the current logged-in user. It exists so callers that already have a $viewer_id (a REST controller resolving on behalf of a specific user, an email/notification job, an app backend) don’t have to swap the global user or hand-roll a signed URL.

namespace WPMediaVerse\Repository;

interface MediaRepositoryInterface {

    /**
     * Viewer-aware URL for the full original file.
     *
     * For public media on a cloud driver this returns the direct CDN URL (same
     * as the broadcast path); for local/non-public media it returns the gated
     * /serve URL. Returns '' when the viewer may not view the media.
     *
     * @since 2.0.0
     *
     * @param int      $media_id  Media ID.
     * @param int|null $viewer_id Viewer to authorize against. Null = current user.
     * @return string Signed URL when the viewer may view the media, else ''.
     */
    public function get_url_for_viewer( int $media_id, ?int $viewer_id = null ): string;
}

$repo = \WPMediaVerse\Core\Plugin::container()->get( 'media_repository' );

// Resolve the file URL as it would appear to a specific member (not the current request user).
$url = $repo->get_url_for_viewer( $media_id, $target_user_id );

if ( '' === $url ) {
    // $target_user_id is not authorized to view this media.
}

Like every other read-side URL helper in this plugin, do not hand-build the path or call SignedUrlService directly — get_url_for_viewer() runs the same privacy check and driver resolution as Core\MediaUrl (see Template Overrides — Getting Media URLs), just parameterized by an explicit viewer instead of the current user. Custom storage drivers do not need to implement anything extra for this to work — it composes StorageService + SignedUrlService the same way the rest of the read path does.